| Product Name | Baby Forehead Infrared Non Contact Fever Alarm Accurate Instant
Reading Thermometer |
| Response Time | 1 second |
| Memory | 32 memory in 1 group |
| Display Model | Digital LCD |
| LCD Size | 25*28mm(L*W) |
| Operating environment | 10~40°C(50°F~104°F) |
| Measurement Range | Body mode:32~42.5°C(89.6°F~108.5°F) Surface mode:0°C~100°C(32°F~212°F) |
| Accuracy | 32~34.9°C:±0.3°C(89.6°F~94.82°F:±0.54°F) 35~42°C:±0.2°C(95°F~107.6°F:±0.36°F) 42.1~42.5°C:±0.3°C(107.78°F~108.5°F:±0.54°F) |
| Resolution | ±0.1°C(32.18°F) |
| Measuring Distance | 3~5cm |
| Package Size | 170*116*55mm |
| Unit weight | 150g (without batteries) |
| Battery | 3V; 2*AA battery |
| Carton | 50pcs/ctn 605*360*295mm |
| Carton Weight | 8.65kgs |
Forehead temperature gun
1. Human body temperature measurement: accurate measurement of
human body temperature,
replacing traditional mercury thermometers. Women who are ready to
have children can use infrared thermometers (forehead thermometers)
to monitor basal body temperature, record the body
temperature during ovulation, and choose the right time to
conceive, and can also measure the
temperature to judge pregnancy and so on.
Of course, the most important thing is to observe whether there is
any abnormality in your body
temperature at any time, to avoid influenza, and to prevent swine
flu.
2. Skin temperature measurement: to measure the surface temperature
of the human skin, for example,
it can be used for re-implantation of a limb to measure the surface
temperature of the skin.
3. Object temperature measurement: measure the surface temperature
of an object, for example,
it can be used to measure the surface temperature of a teacup.
4. Liquid temperature measurement: measure the temperature of the
liquid, such as the temperature
of the baby's bath water. When the baby takes a bath, measure the
water temperature, no longer worry
about cold or hot; it can also measure the water temperature of the
milk bottle to facilitate the preparation
of Baby milk powder
How to use it?
1.Switch between body and object temperature mode
when in measurement mode,press the “SET”key to switch between the
object temperature measurement mode(the display shows a small
house) and the human body temperature measurement mode(the display
shows the child's smiling face)
- Look up the measured historical data
In the shutdown state,press the “MEMO” key to view the last first
measured data,and press it again to view the last second data.The
thermometer can store 32 sets of data measured in the human body
temperature measurement mode.Press the “POW”key to exit the look
up.
- Set parameters of the themometer
In the shutdown state,press and hold the “SET”key to 3 seconds
until the screen lights up.in F1 mode,press “MEMO” to select on or
off.Press “POW” to exit the setting.
- Set the temperature abnormal alarm threshold
In F1 mode,lightly press “SET” button to enter F2 mode,in this
state,press “MEMO” button to set the temperature.Press “POW” to
exit the setting.
- Set temperature compensation
In F2 mode,lightly press “SET” button to enter F3 mode,
press press “MEMO” button to set the temperature compensation.This
operation is more professional,it is recommended to keep the
factory default settings and set the value to zero.Press “POW” to
exit the setting.
- Switch between Celsius/Fahrenheit temperature units
In F3 mode,lightly press “SET” button to enter F4 mode,press
“MEMO” key to set the temperature unit(Celsius/Fahrenheit switching
selection).
FAQ
Q1:The device is on (the screen is measured),but the temperature
cannot be measured.
A1:Confirm whether the product enters the measurement data viewing
mode or parameter setting mode.If you under this mode,please press
the power button(POW key) to shut down(or wait 1 minute to
automatically shut down),and then press the temperature measurement
key after rebooting.
Q2:The temperature measurement is obviously too low
A2:Confirm whether the device is under the object temperature
measurement mode.If so,press the SET key once to enter the human
body temperature measurement mode.Enter the parameter setting mode
and check whether the temperature compensation setting is
negative.It is recommended to set the value to 0.
Q3:The measurement temperature is obviously too high
A3:Enter the parameter setting mode and check whether the
temperature compensation setting is positive.It is recommended to
set the value to 0.
